Why does the induction cooktop display the letter h? Causes and solutions
Common induction cooktop error H
Among manufacturers, a few Panasonic induction cooktops are the most likely to encounter the error displaying the letter H. If you are using this product and the induction cooktop frequently displays the letter H, check the symptoms immediately to accurately determine the causes and find the best solutions below!

| Induction cooktop displaying error H | Symptoms & Causes | Solutions |
| H01 | All buttons do not work when the main power switch is turned on due to a broken connection wire between the cooktops, or the A circuit board, thermal resistor A is damaged. | Check and replace the circuit board |
| H02 | The control panel is not functioning due to the thermistor being disconnected. | Replace the sensor for IGBT |
| H03 | Thermistor A and IGBT thermistor are both disconnected, unable to check and control the temperature of the induction cooking zone. | Check the electronic circuit of the induction cooktop, repair or replace damaged components |
| H04 | Detected that the frying mode of the cooktop has no water, the cooktop automatically pauses. | Add water while cooking and reset the frying mode for safe cooking |
| H05 | Detected disconnection due to thermistor malfunction. | Check and replace the thermistor |
| H06 | Heating element of the cooking zone is hot, detected abnormal temperature | Reduce the temperature of the cooking zone or pause the cooking zone to let the cooktop cool down |
| H07 | Thermistor D is disconnected | Check and replace thermistor D |
| From H11 to H20 | Power supply error | Recheck the power consumption of the cooktop and the power source |
| H21/22/23 | Power supply issues causing the on/off button to be unresponsive. | Check the connection wires of circuit boards A and B, need to replace circuit board A of the induction cooktop displaying the letter H. |
| H24 | Abnormally high cooking zone temperature due to sudden heat increase | Readjust the power of the cooktop, reduce heat or pause to let the cooktop cool down |
| H53 | Error of the induction cooktop’s cooling fan not operating stably, not cooling the cooktop quickly | Check the operation of the fan, replace with a new fan if necessary to ensure the cooling capability of the cooktop |
| H56 | Temperature sensor error | Need to check the temperature sensor of the induction cooktop, immediately replace with a new temperature sensor if the old one is broken or damaged |
For hardware-related technical errors concerning the sensor system or cooling fan within the circuit, the device may issue serious warnings such as error e1 of the induction cooktop before switching to display the series of letter H codes mentioned above.
Above is a summary of the causes and quick fixes for all letter h errors on the induction cooktop. If it is just a basic error, you only need to wait 10 – 15 minutes for the cooktop to cool down and the letter h to disappear. If it is letter h errors accompanied by numbers, you should refer to the corresponding solutions. We hope that the sharing from Kocher – a brand that manufactures and distributes induction cooktops according to German technology will be helpful to you. Köcher is proud to be a pioneer in Vietnam bringing German technology into induction cooktop products.